Inside the tank are two bolts holding the tank on to the base. Unscrew these two bolts and carefully lift water quality the tank from the base. Remove tank to the trash.
The wax ring is used to seal the drain outlet on the bottom of the toilet to the drain opening in the floor. When a toilet is installed, the ring is placed onto the drain... the toilet is dropped onto the ring... and the toilet bolts (also known as closet bolts) are tightened enough to lock the toilet in place. If that wax gasket ring starts to fail or isn't seated properly? Sewer gasses can sneak out from under your toilet causing your bathroom to have that suspicious smell. It can also cause water line repair to escape, sometimes invisibly, with each flush potentially damaging the floor hidden under the toilet.
This so impressed me, that I thought, here is the man who might fix my sink problem, and I told him about my kitchen sink. The look on his face was priceless, as he said, "Ridiculous! Sinks don't leak if they're new." He even showed me what to do. He took out a big heavy-duty screwdriver with a big flat-head blade and showed me. "This is what's probably lose." He put the blade of the screwdriver in a notch the size of a giant screw head that was right in the center of the drain basket where the plug sat in.
Working on the gas lines is also a complex job that only a licensed plumber can handle because it is very dangerous. Small leaks can't always be detected by odor alone, but a licensed professional has the proper equipment that's needed to ensure that you don't have any leaks in the line.
Investigate the plumber's reputation. Ask a neighbor before starting your search or check online for customer reviews. Call the Better Business Bureau or your city to ask about any complaints on file against this company. Finally, ask the plumbing company for references from customers. If they are reluctant to provide references water line repair call another plumber.
If you plan to replace fixtures, you may be able to do this on your own. Buy the same style or functional fit and then turn off the water to make the switch. Follow the directions provided by the manufacturer to get the job done.
Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.